Thank you for purchasing Silent Dribbler Elite.
This is a paragraph. Click "Edit Text" or double-click the text box to edit your content. Be sure to include any relevant information you want to share with your site visitors.
1. Checking the accessories and assembly method
2. Adjusting the tension after use
3. Band replacement (customization/wear and tear)
1. Checking the accessories ~ Assembly method
This is a paragraph. Click "Edit Text" or double-click the text box to edit your content. Be sure to include any relevant information you want to share with your site visitors.
<Product contents>
- Steel frame (net and rubber included)
・Leg parts (4 pieces)
<Assembly procedure>
1. Turn the main frame over and remove the caps from the four corners.
(The removed cap will not be used for assembly.)
2. Attach the leg parts to the holes in the four corners and turn them clockwise to secure them.
*Do not tighten too much as you will be adjusting the height later.
3. Turn the unit over and adjust the height.
Just like adjusting a chair , loosen the screws on the legs and adjust them so that all four legs are firmly in contact with the floor.
Assembly is complete.
2. Adjusting the tension of the net
< When you want to increase the bounce >
1. Remove the rubber band from the hook.
2. Pull it tightly, wrap it around the frame body, and then hang it on the hook.
3. Adjust the other three points in the same way, and once the overall tension is adjusted, you're done.
<When you want to reduce the bounce force>
1. Remove the rubber band from the hook.
2. Pull the rubber out of the end tag (hole) and untie the band wrapped around the frame.
3. Thread the rubber back onto the tag and hang it from your hand onto the hook.
4. Adjust the other three points in the same way, and once the overall tension is adjusted, you're done.
3. How to replace the band
<Customize to your favorite color! >
*Replacement rubber bands (sold separately) are required.
*Do not remove all the bands, but work in one direction at a time.
1. Pull out the one-way rubber band, then thread the replacement rubber band through the tag (hole) on the end.
*Do not hang on a hook.
2. Wrap the tag around the frame once and then thread it through the adjacent tag. (Repeat this process.)
3. When the band is getting shorter, apply tension to the band that is already threaded through the holes to create slack, and then thread the rubber band through to the last tag.
4. Finally, hook the rubber band onto the hook and adjust the whole thing.
5. Adjust the other three points in the same way, and once the overall tension is adjusted, you're done.
4. Contact Us
■I can't get it to work even after watching the video...
■I want to adjust the tension more!
■Can it be disassembled and stored?
■I want this color!! etc...
Please feel free to contact us with any questions, no matter how small.
Our professional staff will be happy to assist you!
